| Type: | Sensor |
|---|---|
| Usage: | Pressure |
| Installation Mode: | Placement |
| Samples: |
Black/Blue/White
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Specification | |
| Model NO. | 830209 |
| Description | Wireless fully sealed Floor Alarm (Floor Transmitter) SFT |
| Intended Use | This Floor Transmitter is a miniaturization wireless fall monitor for connecting to a Wireless Floor Mat to configure a wireless fall alarm Floor Mat, it does not need an additional monitor. The wireless fall alarm Floor Mat is designed to alert caregivers of falls or unwanted movement by alert caregiver whenever weight is applied on sensor mat.
It offers to Caregivers a simple, efficient, and affordable way to create a Silent Wireless Security /Fall prevention/ Wandering System and peace of mind that no movement goes unnoticed. |
| Optional receiving devices and alarm notification |
|
| Wireless communication Protocol | When alarm, the transmitter will send a radio signal to the Nurse Call Receiver or Door Light to report "I am in alarm", the Nurse Call Receiver or Door Light will also send a confirm radio signal to transmitter to say "Well received". Otherwise, the transmitter will send a radio signal with next channel (Frequency-hopping communication with 66 channels) to the Nurse Call Receiver or Door Light until get "Well received". |
| Wireless communication supervise(optional) | Once programed transmitter to Nurse Call Receiver or Door Light, the transmitter will periodically send a radio signal to the Nurse Call Receiver or Door Light to report "I am OK", the Nurse Call Receiver or Door Light will also send a confirm radio signal to transmitter to say "Well received". If the Nurse Call Receiver or Door Light dose not received "I am OK" for certain time period, the connected channel number should flash in a yellow light, indicating the transmitter is in lost status. |
| Power source | CR2450 lithium battery(including) |
| Approximate Battery lifetime | Normal use: 24 month (Alarm: 10 times/day) Max in storage time: 10 months |
| ESD | CONFORMS TO IEC 61000-4-2, A CLASS Air Discharge: +/- 15 KV Contact Discharge: +/- 8 KV |
| FCC Specifications | Carrier frequencies: 2.4GHZ; CONFORMS TO FCC Part 15 RF signal modulation: FSK Frequency-hopping communication with 66 channels |
| Approximate wireless transmission range | 150 feet; in open field With the aid of repeater: 300 feet; in open field |
| Transmitter fail notification (supervising version only) | Once completed Programing Transmitter to NCR, these components will be in supervising by NCR, and will alert for "lost", if one of below condition happen: - The component is too far distance from the NCR. - The component is battery low or expired. - The communication between the component and monitor failure. While the NCR is in 'LOST" mode, the connected channel number should flash in a yellow light, indicating the wireless devices is in lost status. The components will also have a "Check" light flashing to indicating lost status. Change the component if battery low or expired. |
| Wireless transmission delay | 1 second; |
| Alarm indicator LED | Alarm LEDs Light on SFT is lighting orange during SFT transmits wireless alarm signal to receiving components in Alarm Mode |
| Change Alarm indicator LED | Change Alarm LEDs Light on SFT is lighting when SFT has expired or battery low, and once completed Programing Transmitter to NCR, the connected channel number should flash in a yellow light, indicating the SFT is in expired or battery low status. SFT must be replaced when the Change Alarm light is lighting. |
| Button | A two functions push button on the front face of SFT. - If the SFT is in Storage and Transportation Mode, the user are able to place the SFT into the Standby Mode by depress the button more than 5 seconds until you see light is lighting, and then release the Button. - To place the SFT to programing mode, press the button on the transmitter and then hold for 5 seconds until the alarm light on the transmitter flashes orange. Then release the button. |
| Cord | The cord is for attaching SFT to a Wireless Floor Mat. To connect Sensor Pad Transmitter to Wireless Floor Mat, plug the connector on cord of SFT to connector of Wireless Floor Mat until locked. |
| Storage and Transportation Mode | SFT is in Storage and Transportation Mode during shipping and store period. When in Storage and Transportation Mode, the device is in very low power consumption sleeping Mode, no wireless transmission. |
| Standby Mode | SPT is in Standby Mode when it is first Wake up via the button and attached chair or bed pad sensor switch remains open or after Alarm Mode ended. |
| Monitoring Mode | When in Standby Mode, attached SFT to Wireless Floor Mat, it will place SFT in Monitoring Mode |
| Alarm Mode | When in Monitoring Mode, place weight on the Floor Mat, it will place SFT in Alarm Mode, SFT will transmit wireless alarm signal to receiving components and Alarm light on SFT is lighting for 1 second then turn off. After this, Alarm Mode is ended and SPT will be in Standby Mode. |
| Mounting requirement | Place SFT out of sight and reach of resident. |
| Operating, Storage and Transportation | Ambient temperature: +5°C to +45°C Relative Humidity: 30% - 85% Atmospheric Pressure: 700 hPa to 1060 hPa |
| Water protection classification | IPX6 (After attached to wireless Floor Mat) |
| Dimensions (W×D×H) | 42.3×11.2×70.4 mm |
| Weight | 35 g |
| Cord length | 150 mm |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}